Strontium

Strontium Pieces

MATERIAL OVERVIEW

Characteristics: Pale yellow, soft metal, chemically similar to calcium. Soluble in alcohol and acids; decomposes water on contact. Low toxicity.

Hazards: Spontaneously flammable in powder form, ignites when heated above melting point. Reacts with water to evolve hydrogen. Store under mineral oil or argon. 

To avoid oxygen contamination ESPI's strontium pieces and chips are manufactured in a dry argon environment.  The finished pieces or chips are packaged for shipping in either sealed cans under dry argon, glass ampoules under dry argon, or sealed cans with a light coating of high purity mineral oil.

To view a photo of the related item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Sr

Atomic Number:

38

Atomic Weight:

87.62

Density:

2.54 gm/cc

Melting Point:

769 oC

Boiling Point:

1384 oC

Thermal Conductivity:

0.354W/cm/K @ 298.2 K

Electrical Resistivity:

23.0 microhm-cm @ 20 oC

Electronegativity:

1.0 Paulings

Specific Heat:

0.0719Cal/g/K @ 25 oC

Heat of Vaporization:

33.8K-Cal/gm atom at 1384 oC

Heat of Fusion:

0.295Cal/gm mole

TYPICAL ANALYSES - Impurities in ppm

Material/Purity:

2N

Al 2000
Cl 100
Fe 500

STRONTIUM ROD

Material

Purity

Strontium Rod .500” 2N

Rod is cut to order and sold by the inch or foot. Rod can be packaged either under mineral oil or under dry argon. Additional diameters can be drawn in 2-3 days. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

STRONTIUM SHOT, PELLETS, & INGOT

Material

Purity

Strontium Chips, Cans under dry Argon camera1

2N

Strontium Chips, Cans, light oil coating

2N

Strontium Chips, Ampoules under dry Argon  camera1

2N

Strontium Pieces 3-6mm, Cans under dry Argon 

2N

Strontium Pieces 3-6mm, Cans, light oil coating camera1 camera1 2N
Strontium Pieces 1-3mm, Ampoules under dry Argon 2N

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. All forms can be packaged either under mineral oil or under dry argon. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

STRONTIUM COMPOUNDS

Material

Purity

Strontium Carbonate SrCO3  -20 Mesh 5N
Strontium Carbonate SrCO3  -100 Mesh 2N
Strontium Chloride SrCl2  -40 Mesh 2N
Strontium Ferrite SrFe12O19  -325 Mesh 2N5
Strontium Fluoride SrF2  1/4" to 1/8" Pieces 3N
Strontium Fluoride SrF2  -200 Mesh 3N
Strontium Fluoride SrF2  -325 Mesh 2N
Strontium Iodide SrI2  -80 Mesh 2N5
Strontium Titanate SrTiO3  -325 Mesh 3N
Strontium Tungstate SrWO4  -200 Mesh 3N

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

Material Safety Data Sheet - MSDS
Strontium MSDS
Technical Data Sheets
Understanding Mesh Sizes

 

 

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

 

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

  • Casting of pure metals and alloys
  • Vacuum arc melting
  • Induction melting
  • Rod and wire drawing/extrusion
  • Sheet, foil and ribbon rolling
  • CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

 

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

 

 

At We Keep Good Company


Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric


Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center


International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN


Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Caltech, Johns Hopkins University, University of Arizonia, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokoyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg


Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA


Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, Nanosolar, Inc.