Iron

Iron Shot

MATERIAL OVERVIEW

Characteristics: Silver-white, malleable metal. Mechanical properties are altered by impurities, especially carbon. Iron is highly reactive chemically, a strong reducing agent, oxidizes readily in moist air and reacts with steam when hot to yield hydrogen and iron oxides. Dissolves in nonoxidizing acids (sulfuric and hydrochloric) and in cold dilute nitric acid.

Hazards: Tolerance (as oxide fume): 10 mg/m3 of air. Dust and fine particles suspended in air are flammable and an explosion risk. Tolerance for soluble salts (as Fe), 1 mg/m3 of air.

To view a photo of the item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Fe

Atomic Number:

26

Atomic Weight:

55.847

Density:

7.874 gm/cc

Melting Point:

1535 oC

Boiling Point:

2750 oC

Thermal Conductivity:

0.804 W/cm/K @ 298.2 K

Electrical Resistivity:

9.71 microhm-cm @ 20 oC

Electronegativity:

1.8 Paulings

Specific Heat:

0.106 Cal/g/K @ 25 oC

Heat of Vaporization:

84.6 K-Cal/gm atom at 2750 oC

Heat of Fusion:

3.56 Cal/gm mole

 

TYPICAL ANALYSES - Impurities in ppm

Material / Purity:

3N5

4N

Ag 10 <1
C 100 20
Cu 2 <1
Mg 2 0.02
Mn 13 7
Na 5 1
Ni 40 21
P 10 4
S 67 <10
Si 49 16
Sn 5 0.15
Zn 8 <1

IRON WIRE

Material

Purity

Iron Wire .001" 3N5, 4N
Iron Wire .002" 3N5, 4N
Iron Wire .003" 3N5, 4N
Iron Wire .004" 3N5, 4N
Iron Wire .005" 3N5, 4N
Iron Wire .006" 3N5, 4N
Iron Wire .007" 3N5, 4N
Iron Wire .008" 3N5, 4N
Iron Wire .009" 3N5, 4N
Iron Wire .010" 3N5, 4N
Iron Wire .015" 3N5, 4N
Iron Wire .020" 3N5, 4N
Iron Wire .030" 3N5, 4N
Iron Wire .040" 3N5, 4N
Iron Wire .060" 3N5, 4N
Iron Wire .080" 3N5, 4N
Iron Wire .090" 3N5, 4N

Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

IRON ROD

Material

Purity

Iron Rod .0625”  camera1 3N5, 4N
Iron Rod .125”    camera1   3N5, 4N
Iron Rod .250” 3N5, 4N
Iron Rod .500”    camera1   3N5, 4N
Iron Rod .625” 3N5, 4N
Iron Rod .750” 3N5, 4N
Iron Rod 1”        camera1    3N5, 4N

Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

IRON FOIL

Material

Purity

Iron Foil .001” 3N5, 4N
Iron Foil .002” 3N5, 4N
Iron Foil .003” 3N5, 4N
Iron Foil .004”  camera1  camera1  camera1 3N5, 4N
Iron Foil .005” 3N5, 4N
Iron Foil .006” 3N5, 4N
Iron Foil .007” 3N5, 4N
Iron Foil .008” 3N5, 4N
Iron Foil .009” 3N5, 4N

Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

IRON SHEET

Material

Purity

Iron Sheet .010” 3N, 3N5, 4N
Iron Sheet .015" 3N, 3N5, 4N
Iron Sheet .020"  camera1 camera1 camera1 3N, 3N5, 4N
Iron Sheet .025" 3N, 4N
Iron Sheet .030" 3N, 3N5, 4N
Iron Sheet .040" 3N5, 3N8, 4N
Iron Sheet .050" 3N, 4N
Iron Sheet .060" 3N, 3N5, 4N
Iron Sheet .075" 3N5
Iron Sheet .080" 3N, 3N5, 4N
Iron Sheet .090" 3N
Iron Sheet .100" 3N, 3N5
Iron Sheet .125" 3N5, 4N
Iron Sheet .250" 3N5
Iron Sheet .375" 2N5
Iron Sheet .390" 3N
Iron Sheet .500" 3N5
Iron Sheet .875" 3N8
Iron Sheet 1.00" 3N, 3N5

Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

IRON SPUTTERING TARGETS

Material

Purity

Iron Sputtering Target 2"D X .125"T 3N5, 4N
Iron Sputtering Target 2"D X .250"T 3N5, 4N
Iron Sputtering Target 4"D X .125"T 3N5, 4N
Iron Sputtering Target 4"D X .250"T 3N5, 4N
Iron Sputtering Target 5"D X .125"T 3N5, 4N
Iron Sputtering Target 5"D X .250"T 3N5, 4N
Iron Sputtering Target 6"D X .125"T 3N5, 4N
Iron Sputtering Target 6"D X .250"T 3N5, 4N

Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.

IRON POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Iron Shot 1-3mm 4N
Iron Pellets .125"D X .125"L 3N5, 4N
Iron Pellets .250"D X .250"L 3N5, 4N
Iron Pellets .125"D X .125"L Square camera1 4N
Iron Ingot 3N5, 4N
Iron Flake  camera1  camera1 3N5, 4N
Iron Powder-100 Mesh 3N5, 4N
Iron Powder-325 Mesh camera1 camera1 camera1 3N5, 4N

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

IRON COMPOUNDS

Material

Purity

Iron Boride, FeB, -35 Mesh msds1 2N7
Iron Fluoride, FeF2, -80 Mesh msds1 2N5
Iron Oxide, Fe2O3, -325 Mesh msds1 3N
Iron Oxide, Fe3O4, -325 Mesh msds1 1N8
Iron Silicide, FeSi2 msds1 2N

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

 

Material Safety Data Sheet - MSDS

Iron MSDS

Iron Powder MSDS

Technical Data Sheets
Understanding Mesh Sizes

 

 

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

 

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

  • Casting of pure metals and alloys
  • Vacuum arc melting
  • Induction melting
  • Rod and wire drawing/extrusion
  • Sheet, foil and ribbon rolling
  • CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

 

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

 

 

At We Keep Good Company


Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric


Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center


International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN


Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Cal Tech, Johns Hopkins University, University of Arizona, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg


Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA


Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, and many others.