Inconel
MATERIAL OVERVIEW
Inconel 600 is a nickel-chromium-iron alloy with good resistance to corrosion from many organic and inorganic compounds, and a useful temperature range from cryogenic up to 1095 oC (2000 oF). It is used in chemical and food processing, in electronics, for aerospace engine components, for furnace components, and in nuclear reactors.
Inconel 718 is a nickel-chromium-iron alloy with additions of niobium and molybdenum along with lesser amounts of titanium and aluminum. It combines corrosion resistance and high strength with outstanding weldability, including resistance to postweld cracking. The alloy has excellent creep-rupture strength at temperatures up to 700 oC (1300 oF). Used in gas turbines, rocket motors, spacecraft, pumps, and tooling.
To view a photo of the item hover over the 
icon.
GENERAL PROPERTIES
|
Symbol/Alloy: |
600 |
718 |
|
Density: |
8.47 g/cm3 |
8.19 g/cm3 |
|
Melting Point: |
1355oC - 1413oC |
1260oC - 1336oC |
| Specific Heat: | 444 J/kg-K | 435 J/kg-K |
| Electrical Resistivity: | 1.03 microhm-m | 1.25 microhm-m |
TYPICAL ANALYSES - Chemical Composition
|
Material/Alloy Percent: |
600 |
718 |
| Ni(+Co) | 72 | 50-55 |
| Cr | 14-17 | 17-21 |
| Fe | 6-10 | Balance |
| Nb(+Ta) | 4.75-5.5 | |
| Mo | 2.8-3.3 | |
| Ti | 0.65-1.15 | |
| Al | 0.2-0.8 | |
| Co | 1 | |
| C | 0.015 | 0.08 |
| Mn | 1 | 0.35 |
| Si | 0.5 | 0.35 |
| K | 0.015 | |
| S | 0.015 | 0.015 |
| B | 0.006 | |
| Cu | 0.50 | 0.3 |
INCONEL WIRE
|
Material |
Alloy |
| Inconel Wire .005” to .125” | 600, 718 |
Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
INCONEL ROD
|
Material |
Alloy |
| Inconel Rod .062” to 1” | 600, 718 |
Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
INCONEL FOIL
|
Material |
Alloy |
| Inconel Foil .002” | 600, 718 |
| Inconel Foil .003” | 600, 718 |
| Inconel Foil .004” | 600, 718 |
| Inconel Foil .005” | 600, 718 |
| Inconel Foil .006” | 600, 718 |
| Inconel Foil .007” | 600, 718 |
| Inconel Foil .008” | 600, 718 |
| Inconel Foil .009” | 600, 718 |
Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
INCONEL SHEET
|
Material |
Alloy |
Inconel Sheet .010” to 0.50”  |
600, 718 |
Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
INCONEL POWDER, SHOT, PELLETS, & INGOT
|
Material |
Alloy |
| Inconel Pellets .125"D X .125"L | 600, 718 |
| Inconel Pellets .250"D X .250"L | 600, 718 |
Powder pellets are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications and forms or custom requirements.
|
|
ALLOYS 
