Antimony Iodide
SAFETY DATA SHEET
1 PRODUCT AND SUPPLIER IDENTIFICATION
Product Name: Antimony Iodide
Formula: SbI3
Supplier: ESPI Metals
1050 Benson Way
Ashland, OR 97520
Telephone: 800-638-2581
Fax: 541-488-8313
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Emergency: Infotrac 800-535-5053 (US) or 352-323-3500 (24 hour)
Recommended Uses: Scientific Research
2 HAZARDS IDENTIFICATION
GHS Classification (29 CFR 1910.1200): Acute toxicity - oral, category 4, Acute toxicity - inhalation, category 4.
GHS Label Elements:
Signal Word: Warning
Hazard Statements: H302 Harmful if swallowed, H332 Harmful if inhaled.
Precautionary Statements: P261 Avoid breathing dust/fume, P264 Wash hands thoroughly after handling, P270 Do not eat, drink or smoke when using this product, P271 Use only outdoors or in a well-ventilated area, P301+P312+P330 IF SWALLOWED: Rinse mouth. Call a POISON CENTER or doctor/physician if you feel unwell, P304+P340+P312 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing, Call a POISON CENTER or doctor/physician if you feel unwell, P501 Dispose of contents/container in accordance with local, state or federal regulations.
3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient: Antimony (III) Iodide
CAS#: 7790-44-5
%: 100
EC#: 232-205-8
Common Names and Synonyms: Antimony triiodide.
4 FIRST AID MEASURES
General Measures: Remove patient from area of exposure.
INHALATION: Remove to fresh air, keep warm and quiet, give oxygen if breathing is difficult. Seek medical attention.
INGESTION: Rinse mouth with water. Do not induce vomiting. Seek medical attention. Never induce vomiting or give anything by mouth to an unconscious person.
SKIN: Remove contaminated clothing, brush material off skin, wash affected area with soap and water. Seek medical attention if irritation develops or persists.
EYES: Flush eyes with lukewarm water, including under upper and lower eyelids, for at least 15 minutes. Seek medical attention if irritation develops or persists.
Most Important Symptoms/Effects, Acute and Delayed: May cause irritation. See section 11 for more information.
Indication of Immediate Medical Attention and Special Treatment: No other relevant information available.
5 FIREFIGHTING MEASURES
Extinguishing Media: Use suitable extinguishing agent for surrounding materials and type of fire.
Unsuitable Extinguishing Media: No information available.
Specific Hazards Arising from the Material: May release toxic fumes if involved in a fire.
Special Protective Equipment and Precautions for Firefighters: Wear full face, self-contained breathing apparatus and full protective clothing.
6 ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate respiratory and protective equipment specified in section 8. Isolate spill area and provide ventilation. Avoid breathing dust or fume. Avoid contact with skin and eyes. Eliminate all sources of ignition.
Methods and Materials for Containment and Cleaning Up: Avoid raising dust. Scoop or vacuum up using a vacuum system equipped with a HEPA filter. Place in properly labeled closed containers.
Environmental Precautions: Do not allow to enter drains or to be released to the environment.
7 HANDLING AND STORAGE
Precautions for Safe Handling: Handle in an enclosed, controlled process. Avoid creating dust. Avoid breathing dust or fumes. Provide adequate ventilation if dusts are created. Avoid contact with skin and eyes. Wash thoroughly before eating or smoking. See section 8 for information on personal protection equipment.
Conditions for Safe Storage: Store in a cool, dry area. Store material tightly sealed in properly labeled containers. Protect from moisture. Do not store together with oxidizers. See section 10 for more information on incompatible materials.
8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
Exposure Limits: OSHA/PEL: ACGIH/TLV:
Antimony Iodide No exposure limit established No exposure limit established
Antimony and compounds (as Sb) 0.5 mg/m3 0.5 mg/m3
Engineering Controls: Handle in a controlled, enclosed environment. Whenever possible the use of local exhaust ventilation or other engineering controls is the preferred method of controlling exposure to airborne dust and fume to meet established occupational exposure limits. Use good housekeeping and sanitation practices. Do not use tobacco or food in work area. Wash thoroughly before eating or smoking. Do not blow dust off clothing or skin with compressed air.
Individual Protection Measures, Such as Personal Protective Equipment:
Respiratory Protection: NIOSH approved respirator.
Eye Protection: Safety glasses
Skin Protection: Impermeable gloves, protective work clothing as necessary.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Form: Pieces
Color: Red
Odor: No data
Odor Threshold: Not determined
pH: N/A
Melting Point: 170 oC
Boiling Point: 401 oC
Flash Point: N/A
Evaporation Rate: N/A
Flammability: No data
Upper Flammable Limit: No data
Lower Flammable Limit: No data
Vapor Pressure: 1 mm Hg @ 163.6 oC
Vapor Density: N/A
Relative Density (Specific Gravity): 4.917 g/cc@ 17 oC
Solubility in H2O: Decomposes
Partition Coefficient (n-octanol/water): Not determined
Autoignition Temperature: No data
Decomposition Temperature: No data
Viscosity: N/A
10 STABILITY AND REACTIVITY
Reactivity: No specific test data available.
Chemical Stability: Stable under recommended storage conditions.
Possibility of Hazardous Reactions: Contact with acids may release hydrogen iodide. May have an explosive reaction with potassium.
Conditions to Avoid: No data.
Incompatible Materials: Strong oxidizing agents, acids, sodium, potassium.
Hazardous Decomposition Products: Antimony oxides, hydrogen iodide.
11 TOXICOLOGICAL INFORMATION
Likely Routes of Exposure: Inhalation, skin and eyes.
Symptoms of Exposure: May cause irritation and possibly systemic effects including a metallic taste in the mouth, vomiting, colic, loss of appetite and weight, and diarrhea.
Acute and Chronic Effects:
Antimony Compounds: Fatalities from antimony poisoning are rare. Acute systemic exposure to antimony compounds may cause loss of hair, dry scaly skin, and weight loss. Damage to the heart, liver, and kidneys can occur, and death from myocardial failure may follow.
Iodides: Acute or chronic overexposure to iodides may result in iodism or ioderma in sensitive individuals. Symptoms of iodism include abdominal pain, nausea, vomiting, diarrhea, hypersalivation, conjunctivitis, runny nose, headache, and fever. Symptoms of ioderma include skin rashes, pustules and lesions. Weakness, anemia, loss of weight and general depression may also occur.
Acute Toxicity: No data
Carcinogenicity: NTP: Not identified as carcinogenic IARC: Not identified as carcinogenic
To the best of our knowledge the chemical, physical and toxicological characteristics of the substance are not fully known.
12 ECOLOGICAL INFORMATION
Ecotoxicity: No data
Persistence and Degradability: No data
Bioaccumulative Potential: No data
Mobility in Soil: No data
Other Adverse Effects: Do not allow material to be released to the environment. No further relevant information available.
13 DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Product: Dispose of in accordance with Federal, State and Local regulations.
Packaging: Dispose of in accordance with Federal, State and Local regulations.
14 TRANSPORT INFORMATION
UN Number: UN1549
UN Proper Shipping Name: Antimony compounds, inorganic, solid, n.o.s. (Antimony Iodide)
Transport Hazard Class: 6.1
Packing Group: III
Marine Pollutant: Yes
15 REGULATORY INFORMATION
TSCA Listed: Yes
DSL Listed: No
Regulation (EC) No 1272/2008 (CLP): Acute toxicity - oral, category 4, Acute toxicity - inhalation, category 4, Hazardous to the aquatic environment - chronic hazard, category 2.
WHMIS 2015 Classification: Acute toxicity.
HMIS Ratings: Health: 2 Flammability: 0 Physical: 0
NFPA Ratings: Health: 2 Flammability: 0 Instability: 0
Chemical Safety Assessment: A chemical safety assessment has not been carried out.
16 OTHER INFORMATION
The information contained in this document is based on the state of our knowledge at the time of publication and is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI Metals makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. ESPI Metals shall not be held liable for any damages resulting from handling or from contact with the above product. Users should satisfy themselves that they have all current data relevant to their particular use.
Prepared by: ESPI Metals
Revised/Reviewed: July 2016