Zirconium
MATERIAL OVERVIEW
Characteristics: Hard, lustrous, grayish, crystalline scales or gray amorphous powder. Soluble in hot, very concentrated acids. Insoluble in water and cold acids. Corrosion-resistant; low neutron absorption. Low toxicity.
Hazards: A suspected carcinogen. Not permitted in cosmetics (FDA). Flammable and explosive as dust or powder, and in form of borings, shavings, etc. Tolerance, (as Zr): 5 mg/m3 of air (applies to all Zr compounds). Powder should be kept in wet storage and protective clothing should be worn.
To view a photo of the item hover over the icon.
GENERAL PROPERTIES
Symbol: |
Zr |
Atomic Number: |
40 |
Atomic Weight: |
91.22 |
Density: |
6.506 gm/cc |
Melting Point: |
1852 oC |
Boiling Point: |
4377 oC |
Thermal Conductivity: |
0.227 W/cm/K @ 298.2 K |
Electrical Resistivity: |
40.0 microhm-cm @ 20 oC |
Electronegativity: |
1.4 Paulings |
Specific Heat: |
0.0671 Cal/g/K @ 25 oC |
Heat of Vaporization: |
120 K-Cal/gm atom at 4377 oC |
Heat of Fusion: |
5.50 Cal/gm mole |
TYPICAL ANALYSES - Impurities in percent
Material / Purity: |
3N excl Hf |
C | 0.01 |
Fe+Cr | 0.07 |
H | 0.001 |
Hf | 1.1 |
N | 0.005 |
O | 0.14 |
ZIRCONIUM WIRE
Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
ZIRCONIUM ROD
Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
ZIRCONIUM FOIL
Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
ZIRCONIUM SHEET
Material |
Purity |
Zirconium Sheet .010” |
3N |
Zirconium Sheet .014" | 3N |
Zirconium Sheet .015" | 3N |
Zirconium Sheet .020" | 3N |
Zirconium Sheet .025" | 3N |
Zirconium Sheet .028" | 3N |
Zirconium Sheet .030" | 3N |
Zirconium Sheet .040" | 3N |
Zirconium Sheet .050" | 3N |
Zirconium Sheet .060" | 3N |
Zirconium Sheet .080" | 3N |
Zirconium Sheet .125 | 3N |
Zirconium Sheet .140" | 3N |
Zirconium Sheet .250" | 3N |
Zirconium Sheet .275" | 3N |
Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
ZIRCONIUM SPUTTERING TARGETS
Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.
ZIRCONIUM POWDER, SHOT, PELLETS, & INGOT
Material |
Purity |
Zirconium Pellets .125"D X .125"L | 2N8, 3N |
Zirconium Pellets .250"D X .250"L | 2N8, 3N |
Zirconium Ingot | 2N8, 3N |
Zirconium Powder -60, +100 Mesh | 2N |
Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
ZIRCONIUM COMPOUNDS
Material |
Purity |
Zirconium Boride ZrB2 -325 Mesh | 2N+ |
Zirconium Boride ZrB2 -200 Mesh | 2N5 |
Zirconium Carbide Powder ZrC | 2N5 |
Zirconium Fluoride ZrF4 -4 Mesh | 3N |
Zirconium Oxide ZrO2 -325 Mesh | 2N, 2N7, 4N5 |
Zirconium Oxide ZrO2 1/2" to 1/8" Pieces | 2N7 |
Zirconium Oxide ZrO2 Tablets | 2N7 |
Zirconium Silicate ZrSiO4 -325 Mesh | 2N |
Zirconium Silicide ZrSi2 -325 Mesh | 2N5 |
Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
|
|