Vanadium

MATERIAL OVERVIEW
Characteristics: Silvery-white ductile solid. Insoluble in water. Resistant to corrosion, but soluble in nitric, hydrofluoric and concentrated sulfuric acids. Attacked by alkali, forming water soluble vanadates. Acts as either a metal or nonmetal, and forms a variety of complex compounds. Nontoxic as metal.
To view a photo of the item hover over the
icon.
GENERAL PROPERTIES
|
Symbol: |
V |
|
Atomic Number: |
23 |
|
Atomic Weight: |
50.9415 |
|
Density: |
6.11 gm/cc |
|
Melting Point: |
1890 oC |
|
Boiling Point: |
3380 oC |
|
Thermal Conductivity: |
0.307 W/cm/K @ 298.2 K |
|
Electrical Resistivity: |
25.4 microhm-cm @ 20 oC |
|
Electronegativity: |
1.6 Paulings |
|
Specific Heat: |
0.116 Cal/g/K @ 25 oC |
|
Heat of Vaporization: |
106 K-Cal/gm atom at 3380 oC |
|
Heat of Fusion: |
4.20 Cal/gm mole |
|
Linear Coefficient of Expansion: |
9.7 x 10-6 @ 20 oC
|
TYPICAL ANALYSES - Impurities in ppm
|
Material / Purity: |
2N5 |
2N8 |
3N |
| Al | 350 | 100 | 50 |
| Ca | <200 | <100 | <50 |
| Cr | 100 | 60 | 50 |
| Cu | <50 | <50 | <50 |
| Fe | 800 | 500 | 200 |
| Mo | 500 | 150 | 130 |
| Ni | 300 | <100 | <50 |
| Si | 800 | 450 | 150 |
| Sn | <100 | <50 | <30 |
| Ti | 250 | 150 | 150 |
VANADIUM WIRE
Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
VANADIUM ROD
Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
VANADIUM FOIL
Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
VANADIUM SHEET
|
Material |
Purity |
| Vanadium Sheet .010” |
2N8, 3N |
| Vanadium Sheet .015" | 2N8 |
| Vanadium Sheet .016" | 2N8 |
| Vanadium Sheet .020" | 2N8 |
| Vanadium Sheet .025" | 2N8 |
| Vanadium Sheet .030" | 2N8, 3N |
| Vanadium Sheet .040" | 3N |
| Vanadium Sheet .050" | 2N8 |
| Vabadium Sheet .060" | 2N8 |
| Vabadium Sheet .080" | 2N8 |
| Vanadium Sheet .125" | 3N |
| Vanadium Sheet .150" | 2N8 |
| Vanadium Sheet .175" | 3N |
| Vanadium Sheet .250" | 3N |
| Vanadium Sheet .300" | 2N8, 3N |
| Vanadium Sheet .375" | 2N5 |
| Vanadium Sheet .500" | 3N |
| Vanadium Sheet 1.00" | 2N8 |
Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
VANADIUM SPUTTERING TARGETS
|
Material |
Purity |
| Vanadium Sputtering Target 2"D X .125"T | 2N8, 3N |
| Vanadium Sputtering Target 2"D X .250"T | 2N8, 3N |
| Vanadium Sputtering Target 3"D X .125"T | 2N8, 3N |
| Vanadium Sputtering Target 3"D X .250"T | 2N8, 3N |
| Vanadium Sputtering Target 4"D X .125"T | 2N8, 3N |
| Vanadium Sputtering Target 4"D X .250"T | 2N8, 3N |
Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.
VANADIUM POWDER, SHOT, PELLETS, INGOT & TURNINGS
|
Material |
Purity |
| Vanadium Pellets .125"D X .125"L | 2N8, 3N |
| Vanadium Pellets .250"D X .250"L | 2N8, 3N |
| Vanadium Pieces | 2N8, 3N |
| Vanadium Turnings | 2N8, 3N |
| Vanadium Ingot | 2N8, 3N |
| Vanadium Powder-20 Mesh | 2N8 |
| Vanadium Powder-325 Mesh | 2N8 |
Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
VANADIUM COMPOUNDS
|
Material |
Purity |
| Vanadium Carbide VC -325 Mesh 2N5 | 2N5 |
Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
|
|