ELECTRONIC SPACE PRODUCTS INTERNATIONAL


1050 Benson Way, Ashland, OR 97520

Toll Free (800) 638-2581 * Fax (541) 488-8313

E-Mail: sales@espimetals.com

 

 

MATERIAL SAFETY DATA SHEET

 

 

 

I            PRODUCT IDENTIFICATION


 

 

Trade Name: Sodium Hexachloroosmate IV                                                  Formula: Na2OsCl6

 

 

II           HAZARDOUS INGREDIENTS


 

 

%:         100                                                                                                             TLV(Units): 1.0 mg/m3

 

 

III         PHYSICAL DATA


 

 

Melting Point:                  N/A                                                                               Specific Gravity:              N/A

Solubility in Water:         Slightly soluble                                                             Specific Gravity:              N/A

Appearance and Odor:    Red/brown crystalline powder.

 

 

IV         FIRE AND EXPLOSION HAZARDS DATA


 

 

Flash Point: N/A                                                                                                    Flammable Limits: Not flammable

Extinguishing Media: CO2, Foam, dry chemical.

Special Firefighting Procedures: Self-contained breathing apparatus.

Unusual Fire and Explosion Hazards: May emit toxic fumes upon decomposition.

 

 

V           HEALTH HAZARD INFORMATION


 

 

Effects of Over Exposure: Osmium and its compounds are considered to be very toxic. Can Cause temporary night blindness, and respiratory problems.

 

EMERGENCY AND FIRST AID PROCEDURES: Remove patient from area of exposure to fresh air.

 

EXTERNAL: Flush with soap and water for 15 minutes.

EYES: Flush with eye bath.

INTERNAL: Contact poison control center/physician.

 

 

VI         REACTIVITY DATA


 

 

Stability: Stable

Conditions to Avoid: Extreme heat.

 

Hazardous Decomposition Products: OsO4, Cl

Incompatible Materials: All acids, alkali, organic solvents, Zn, Al, Oxidizers!!!!

Hazardous Polymerization: Will not occur

 

 

 


VII        SPILL OR LEAK PROCEDURES


 

 

Steps to Be Taken in Case Material Is Released or Spilled: Sweep up and place in airtight plastic container.

 

Waste Disposal Method: Ship to precious metal refiner.

 

 

VIII      SPECIAL PROTECTION INFORMATION


 

 

Respiratory Protection: NIOSH/MSHA approved.                                              Ventilation: Fume hood

 

Protective Gloves: Rubber for all contact                                                              Eye Protection: Goggles

Other Protective Equipment: Normal labwear.

 

 

IX         SPECIAL PRECAUTIONS


 

 

Precautionary Labeling: In compliance with OSHA and NFPA requirements.

Other Precautions: Store in cool dry place, keep tightly sealed when not in use, read MSDS before using.

 

              The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling or from contact with the above product.

 

 

Issued By:           S. Dierks

Date:                    November 1994