ELECTRONIC SPACE PRODUCTS INTERNATIONAL


1050 Benson Way, Ashland, OR 97520

Toll Free (800) 638-2581 * Fax (541) 488-8313

E-Mail: sales@espimetals.com

 

 

MATERIAL SAFETY DATA SHEET

 

 

 

I            PRODUCT IDENTIFICATION


 

 

Trade Name:      Potassium Hexachloroosmate (IV)                                             Formula:            K2OsCl6

CAS #:                16871-60-6

 

 

II           HAZARDOUS INGREDIENTS


 

 

Hazardous Component                  %                        OSHA/PEL                       ACGIH/TLV

Potassium Hexachloroosmate          0-100                   N/E                                    N/E

 

HMIS Ratings: Health: 1             Flammability: 0               Reactivity: 0

 

 

III         PHYSICAL DATA


 

 

Boiling Point:                   N/E                                                                               Melting Point:                  600 oC (decomposes)

Specific Gravity:              3.42 g/cc                                                                       Vapor Pressure:               N/E or N/A

Vapor Density:                 N/A                                                                               % Volatile:                       N/A

Appearance and Odor:    Red/brown crystalline powder, odor not determined.   Solubility in Water:         Very soluble

 

 

IV         FIRE AND EXPLOSION HAZARDS DATA


 

 

Flash Point: N/A                                                                                                    Autoignition Temperature: N/E

Flammable Limits: Lower: N/A  Upper: N/A

 

Extinguishing Media: Use suitable extinguishing media for surrounding material and type of fire.

Special Firefighting Procedures: Firefighters must wear full face, self-contained breathing apparatus with full protective clothing to prevent contact with skin and eyes.

 

Unusual Fire and Explosion Hazards: May emit toxic fumes of hydrogen chloride and metal oxide upon decomposition.

 

 

V           HEALTH HAZARD INFORMATION


 

 

Effects of Exposure:

 

              To the best of our knowledge the chemical, physical and toxicological properties of potassium hexachloroosmate have not been thoroughly investigated and recorded.

 

              Oxidation of osmium compounds may form the volatile and highly irritating osmium (VIII) oxide. Exposure may cause bronchitis and dermatitis, occular disturbances. Ingestion may cause heavy metal poisoning. Irritating to skin and mucous membranes.

 

Carcinogenicity: NTP: No           IARC: No          OSHA: No

 

 

 

EMERGENCY AND FIRST AID PROCEDURES:

 

INHALATION: Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

INGESTION: Seek immediate medical advice.

SKIN: Immediately wash with soap and water and rinse thoroughly. Seek immediate medical advice.

EYES: Flush eyes with lukewarm water, lifting upper and lower eyelid, for at least 15 minutes. Seek medical advice.

 

 

VI         REACTIVITY DATA


 

 

Stability: Stable

Conditions to Avoid: Extreme heat, water/moisture.

Incompatible Materials: All acids, oxidizers, metal powder solvents.

 

Hazardous Decomposition Products: OsO4, HCl

Hazardous Polymerization: Will not occur

 

 

VII        SPILL OR LEAK PROCEDURES


 

 

Steps to Be Taken in Case Material Is Released or Spilled: Wear appropriate respiratory and protective equipment specified in section VIII. Isolate spill area and provide ventilation. Sweep up and place in airtight plastic container. Take care not to raise dust.

 

Waste Disposal Method: Ship to precious metal refiner.

 

 

VIII      SPECIAL PROTECTION INFORMATION


 

 

Respiratory Protection: NIOSH/MSHA approved respirator when high concentrations are present.

Ventilation: Use local exhaust to maintain concentration at low exposure levels. Hygroscopic, handle under dry, inert gas.

Protective Gloves: Rubber for all contact

Eye Protection: Goggles

Other Protective Equipment: Normal labwear.

 

 

IX         SPECIAL PRECAUTIONS


 

 

Precautions to Be Taken in Handling and Storage: Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace. Store away from oxidizing agents. Store away from water/moisture.

 

Other Precautions: This product is hygroscopic. Store under dry inert gas. Protect from humidity and water.

 

Work Practices: Implement engineering and work practice controls to reduce and maintain concentration of exposure at low levels. Use good housekeeping and sanitation practices. Do not use tobacco or food in work area. Wash thoroughly before eating and smoking. Do not blow dust off clothing or skin with compressed air. Maintain eyewash capable of sustained flushing, safety drench shower and facilities for washing.

 

              The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling or from contact with the above product.

 

 

Issued By:           S. Dierks

Date:                    March 2005