ELECTRONIC SPACE PRODUCTS INTERNATIONAL
1050 Benson Way, Ashland, OR 97520
Toll Free (800) 638-2581 * Fax (541) 488-8313
E-Mail: sales@espimetals.com
MATERIAL SAFETY DATA SHEET
I PRODUCT IDENTIFICATION
Trade Name: Lithium Titanate Formula: Li2TiO3
Molecular Weight: 109.78 CAS #: 12031-82-2
II HAZARDOUS INGREDIENTS
Lithium Titanate %: 100 OSHA/PEL: No Data ACGIH(TLV): No Data
*Component subject to reporting requirements of Section 313 of the Emergency Planning and Community Right-to-Know Act: Title compound: Not listed.
III PHYSICAL DATA
Boiling Point: No data Melting Point: 1520-1564 oC
Specific Gravity (H2O=1): No data Vapor Pressure: No data
Solubility in Water: Insoluble Color and Form: White powder
IV FIRE AND EXPLOSION HAZARDS DATA
Flash Point: None
Extinguishing Media: Carbon dioxide or dry powder
Special Fire Fighting Procedures: Non-flammable material. If involved in a fire toxic oxidation or decomposition products may form. Leave the area unless fitted with a self-contained breathing apparatus and fire protective clothing.
Unusual Fire or Explosion Hazards: Non-flammable material. No unusual fire or explosion hazards.
V HEALTH HAZARD INFORMATION
Mode of Entry: Inhalation: No Skin: No Ingestion: Yes
Carcinogenicity: NTP: No IARC: No OSHA: No
Effects of Overexposure: No specific information available on toxicity or effects of overexposure. Lithium compounds are implicated in the development of aplastic anemia. Lithium ion is toxic to the central nervous system. Can cause kidney damage, dizziness, prostration, annexa, nausea, apathy, comas and possibly death.
EMERGENCY AND FIRST AID PROCEDURES:
EYES: In case of eye contact immediately flush the eyes with water for at least 15 minutes.
SKIN: In case of skin contact wash the affected area with soap and water for at least 5 minutes.
INHALATION: If inhaled remove victim to fresh air and seek medical attention if coughing, shortness of breath or irritation persists.
INGESTION: If ingested give victim plenty of water and seek immediate medical assistance.
VI REACTIVITY DATA
Stability: Air and moisture-stable material
Conditions to Avoid: None
Hazardous Polymerization: No hazardous polymerization.
Hazardous Decomposition: Lithium oxide and titanium oxide.
VII SPILL OR LEAK PROCEDURES
Steps to Be Taken in Case Material Is Spilled or Released: Sweep up the solid and dispose of properly.
Waste Disposal Method: Material should be disposed of in accordance with local, state and federal regulations.
VIII SPECIAL PROTECTION INFORMATION
Respiratory Protection: Wear a NIOSH/MSHA approved dust mask.
Ventilation: Local Exhaust: Yes Other: No
Protective Gloves: Yes Eye Protection: Yes
Other Protective Equipment: No other protection equipment needed.
IX SPECIAL PRECAUTIONS
Precautions to Be Taken in Handling and Storage: Store the material in a sealed container. Keep away from heat and moisture.
Other Precautions: No special precautions necessary. To minimize exposure handle the material in an efficient fume hood.
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling or from contact with the above product.
Prepared by: S. Dierks
Dated: November 1994