ELECTRONIC SPACE PRODUCTS INTERNATIONAL
1050 Benson Way, Ashland, OR 97520
Toll Free (800) 638-2581 * Fax (541) 488-8313
E-Mail: sales@espimetals.com
MATERIAL SAFETY DATA SHEET
I PRODUCT IDENTIFICATION
Trade Name: Europium Oxide Chemical Family: Lanthanides
Chemical Formula: Eu2O3 CAS #: 1308-96-9
II HAZARDOUS INGREDIENTS
Hazardous Components % OSHA/PEL ACGIH/TLV
Europium Oxide 0-100 N/E N/E
III PHYSICAL DATA
Boiling Point: N/E Melting Point: N/A
Vapor Density: N/A Vapor Pressure: N/A
Specific Gravity: 7.42 g/cc Solubility in H2O: Insoluble
Appearance and Odor: White powder, no odor. % Volatiles: N/A
IV FIRE AND EXPLOSION HAZARD DATA
Flash Point: N/A Autoignition Temperature: N/A
Flammable Limits: Lower: N/A Upper: N/A
Extinguishing Media: Oxide does not burn. Use suitable extinguishing media for surrounding material and type of fire.
Special Firefighting Procedures: Firefighters must wear full face, self-contained breathing apparatus with full protective clothing to prevent contact with skin and eyes. Fumes from fire are hazardous. Isolate runoff to prevent environmental pollution.
Unusual Fire & Explosion Hazard: None
V HEALTH HAZARD INFORMATION
Threshold Limit Value: Not established, non-toxic, LD50 rat orally 1,000 mg/kg.
Effects of Exposure:
Inhalation: Unknown
Ingestion: Unknown
Skin: Can cause slight irritation.
Eye: Can cause particle irritation.
Carcinogenicity: NTP: No IARC: No OSHA: No
Medical Conditions Generally Aggravated by Exposure: No data
EMERGENCY AND FIRST AID PROCEDURES:
INHALATION: Remove victim to fresh air, keep warm and quiet, give oxygen if breathing is difficult. Seek medical attention.
INGESTION: If conscious, give 1-2 glasses of water or milk and induce vomiting. Seek medical attention.
SKIN: Wash with soap and water. If irritation develops or persists, seek medical attention.
EYE: Flush with water, including under eyelids, for at least 15 minutes. Seek medical attention if irritation develops or persists.
VI REACTIVITY DATA
Stability: Stable
Incompatibility (Materials to Avoid): Acids
Hazardous Decomposition Products: N/A
Hazardous Polymerization: Will not occur
VII SPILL OR LEAK PROCEDURES
Steps to Be Taken in Case Material Is Released or Spilled: Wearing appropriate respiratory and protective equipment, sweep or vacuum up spill using a HEPA air filter and place in a closed container for disposal. Take care not to raise dust.
Waste Disposal Method: Dispose of in accordance with all State, Federal and Local regulations.
VIII SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): NIOSH approved dust respirator.
Ventilation: Use local exhaust if dusting occurs.
Protective Gloves: Rubber
Eye Protection: ANSI safety glasses
Other Protective Equipment: Protective gear suitable to prevent contamination.
IX SPECIAL PRECAUTIONS
Precautions to Be Taken in Handling and Storage: Store in tightly sealed container in a cool, dry area. It will absorb moisture and CO2. Wash thoroughly after handling.
Work Practices: Implement engineering and work practice controls to reduce and maintain concentration of exposure. Use good housekeeping and sanitation practices. Do not use tobacco or food in work area. Wash thoroughly before eating or smoking. Do not blow dust off clothing or skin with compressed air. Maintain eyewash capable of sustained flushing, safety drench shower and facilities for washing.
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling for from contact with the above product.
Issued by: S. Dierks
Date: November 1994