High Purity Metal Specialists
Home | Contact Us
Company Profile | Online Catalog | Technical Data | MSDS's | Ordering  Information | FAQ

 



TUNGSTEN (W)

 

MATERIAL OVERVIEW

Characteristics: Hard, brittle, gray solid. Not found native. High electrical conductivity. Soluble in a mixture of nitric acid and hydrofluoric acid. Low toxicity. Corroded by seawater. Oxidizes in air at 400 °C, the rate increasing rapidly with temperature.

Hazards: Finely divided form is highly flammable and may ignite spontaneously. Tolerance (as W) (insoluble compounds): 5 mg/m3 of air; soluble compounds, 1 mg/m3 of air.  

 

GENERAL PROPERTIES

Symbol:

W

Atomic Number:

74

Atomic Weight:

183.85

Density:

19.3 gm/cc

Melting Point:

3410 oC

Boiling Point:

5900 oC

Thermal Conductivity:

1.73 W/cm/oK @ 298.2 oK

Electrical Resistivity:

5.65 microhm-cm @ 27 oC

Electronegativity:

1.7 Paulings

Specific Heat:

0.0317 Cal/g/oK @ 25 oC

Heat of Vaporization:

185 K-Cal/gm atom at 5660 oC

Heat of Fusion:

8.42 Cal/gm mole  

TYPICAL ANALYSES

Impurities in ppm

Material / Purity:

3N7

3N8

4N

K

<40

<20

<10.0

Cr

<40

10

<10.0

Ni

130

130

30.0

Cu

<40

<20

<10.0

Fe

40

20

10.0

 

TUNGSTEN WIRE

Material

Purity

Tungsten Wire .001” to .090”

3N8

Wire is spooled to order and sold by the foot or meter.  

TUNGSTEN ROD

Material

Purity

Tungsten Rod .003” X 12” to .060 X 12”

3N8

     

Small diameter rod is sold in one foot lengths.  

TUNGSTEN FOIL

Material

Purity

Tungsten Foil .001”

3N8

Tungsten Foil .002”

3N8

Tungsten Foil .003”

3N8

Tungsten Foil .004”

3N8

Tungsten Foil .005”

3N8

Tungsten Foil .006”

3N8

Tungsten Foil .007”

3N8

Tungsten Foil .008”

3N8

Tungsten Foil .009”

3N8

Foil is cut to order and sold by the square inch or square foot.  

TUNGSTEN SHEET

Material

Purity

Tungsten Sheet .010” to 1”

3N8

Sheet is cut to order and sold by the square inch or square foot.  

TUNGSTEN SPUTTERING TARGETS

Material

Purity

Tungsten Sputtering Target 2"D X .125"T

3N7

Tungsten Sputtering Target 2"D X .250"T

3N7

Tungsten Sputtering Target 3"D X .125"T

3N7

Tungsten Sputtering Target 3"D X .250"T

3N7

Tungsten Sputtering Target 4"D X .125"T

3N7

Tungsten Sputtering Target 4"D X .250"T

3N7

Additional sizes available upon request.  

TUNGSTEN POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Tungsten Pellets  .250"D X .125"L

3N7

Tungsten Pellets .250"D X .250"L

3N7

Tungsten Ingot

3N7

Tungsten Powder-100 Mesh

3N7

Tungsten Powder-325 Mesh

3N7

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram.

 

TUNGSTEN COMPOUNDS

Material

Purity

Tungsten Carbide WC  -325 Mesh  +10 Mesh

2N5

Tungsten Carbide WC  Less Than 1 Micron

2N5

Tungsten Carbide W2C  -325 Mesh

2N5

Tungsten Oxide WO2  -100 Mesh

3N

Tungsten Oxide WO3  1/2" to 1/8" Pieces

3N

Tungsten Oxide WO3  -325 Mesh

3N

Tungsten Selenide WSe2  5 Microns or Less

2N8

Tungsten Silicide WSi2  -325 Mesh

2N5

Tungsten Silicide W5Si3  -100 Mesh

2N5

Tungsten Sulfide WS2  1 Micron or Less

2N8

Compounds are packaged to order and sold by the gram or kilogram.  

Material Safety Data Sheet – MSDS

Tungsten MSDS

Technical Data Sheets

Tungsten
Tungsten – Machining
Tungsten Copper - Machinings
Understanding Mesh Sizes

 

Last updated:

Copyright 2002 | ESPICorp Inc.