Silver Powder, Shot, Pellets, Ingot

Print Email
sample forms ingot sample powder sample
Pellet, piece & sphere samples Ingot sample Powder sample

MATERIAL OVERVIEW

ESPI offers Shot, Pellets, Pieces, Chips, Powder and many other forms made up of many different element’s and/or alloys as well as manufactured in numerous purities; up to 6N (99.9999%).

In metal fabrication, there are different complexities that determine and influence the outcome of the resulting product. What greatly affects the form includes what type of metal is being initially used and whether the metals are of a high temperature or low temperature variety. Often, to make one form, it might require a process in which you create one form that results in another. For example, pellets, often start off as rods and then are cut into individual smaller pieces. There are numerous type of forms available from ESPI which are elaborated on other pages. Some forms are of similar style and are included below with additional information about how they are produced.

In addition to standard sizes listed in our online catalog, custom shapes and sizes are available upon request.  If you have a specific requirement contact us by telephone at (800)638-2581, This email address is being protected from spambots. You need JavaScript enabled to view it. or click the "Chat Now" link to the right for immediate assistance.

Characteristics: Soft, ductile, lustrous white solid. Highest electrical and thermal conductivity of all metals. Resists oxidation, but tarnishes in air through reaction with atmospheric sulfur compounds. Absorbs oxygen strongly at melting point. Soluble in nitric acid, and alkali cyanide solutions, insoluble in water and alkalies. Noncombustible, except as powder.

Hazards: Tolerance (metal) 0.1 mg/m3 of air; (soluble compounds, (as Ag), 0.1 mg/m3 of air).

GENERAL PROPERTIES

Symbol:

Ag

Atomic Number:

47

Atomic Weight:

107.868

Density:

10.50 gm/cc

Melting Point:

961.93 oC

Boiling Point:

2212 oC

Thermal Conductivity:

4.29 W/cm/K @ 298.2 K

Electrical Resistivity:

1.586 microhm-cm @ 20 oC

Electronegativity:

1.9 Paulings

Specific Heat:

0.0566 Cal/g/K @ 25 oC

Heat of Vaporization:

60.7 K-Cal/gm atom at 2212 oC

Heat of Fusion:

2.70 Cal/gm mole

 

TYPICAL ANALYSES - Impurities in ppm

Material / Purity:

3N5

4N

5N

6N

Ca 200 40 - -
Na <20 <4 - -
Pb <20 <4 - <.20
Si 75 15 - -
Ni - - - .10
Fe 40 8 2 <.14
Mg 50 10 - -
Bi <20 <5 <.2 -
Cu 45 8 .6 .19
Pd - - .6 .46

SILVER POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Silver Shot 1-3 mm 3N5, 4N, 5N, 6N
Silver Shot 3 mm 3N5, 4N, 5N, 6N
Silver Shot 3-6 mm 3N5, 4N, 5N
Silver Pellets .125"D X .250"L 3N5, 4N, 5N
Silver Pellets .250"D X .250"L 3N5, 4N, 5N
Silver Ingot 3N5, 4N, 5N
Silver Flake 2N
Silver Powder -22 Mesh 5N
Silver Powder -100 Mesh 5N
Silver Powder -325 Mesh 5N
Silver Powder 1-5 Micron 5N
Silver Powder 0.5-0.8 Micron 5N

 - Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

CUSTOMERS FOR SILVER POWDER, SHOT, PELLETS & INGOT HAVE ALSO SHOWN INTEREST IN: 

SILVER WIRE

SILVER ROD

SILVER FOIL

SILVER SHEET

SILVER SPUTTERING TARGETS

SILVER COMPOUNDS

 

Material Safety Data Sheet - MSDS
Silver MSDS
Technical Data Sheets
Silver
Understanding Mesh Sizes