Titanium

Print Email

Titanium Target

MATERIAL OVERVIEW

Characteristics: Silvery solid or dark grey amorphous powder, as strong as steel but 45% lighter. Vickers hardness 80-100. Excellent resistance to atmospheric and seawater corrosion, and to corrosion by chlorine, chlorinated solvents and sulfur compounds. Reactive when hot or molten. Insoluble in water. Inert to nitric acid but attacked by concentrated sulfuric acid and hydrochloric acid. Unaffected by strong alkalies. Low toxicity.

Hazards: (dry powder) Flammable, dangerous fire and explosion risk. (Metal) Ignites in air at 1200 °C; will burn in atmosphere of nitrogen. Do not use water or carbon dioxide to extinguish.

To view a photo of the item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Ti

Atomic Number:

22

Atomic Weight:

47.90

Density:

4.54 gm/cc

Melting Point:

1660 oC

Boiling Point:

3287 oC

Thermal Conductivity:

0.219 W/cm/K @ 298.2 K

Electrical Resistivity:

42.0 microhm-cm @ 20 C

Electronegativity:

1.5 Paulings

Specific Heat:

0.125 Cal/g/K @ 25 oC

Heat of Vaporization:

106.5 K-Cal/gm atom at 3287 oC

Heat of Fusion:

5.0 Cal/gm mole

 

TITANIUM VIDEO CLIPS

niobium metal
Click the camera icon to view:
Titanium Metal

TYPICAL ANALYSES

Material / Purity:

Grade 1       (%)

Grade 2       (%) Grade 3       (%) Grade 4       (%)

4N  (ppm)

O 0.18 0.25 0.35 0.40 200
Ti Balance Balance Balance Balance Balance
C 0.08 0.08 0.08 0.08 18
N 0.03 0.03 0.05 0.05 12.5
Fe 0.20 0.30 0.30 0.50 8.6
H 0.015 0.015 0.015 0.015 2
Si - - - - .82
Sn - - - - -
Cu - - - - <.10
Ca - - - - <.5
Al - - - - .71
B - - - - .04
Cr - - - - .85
Mo - - - - <.05
Ni - - - - <.02
P - - - - <.01
K - - - - <.03
Nb - - - - <.3
W - - - - 2.80
Zr - - - - 3.10
As - - - - <.01
V - - - - 25
Zn - - - - .10

TITANIUM WIRE

Material

Purity

Titanium Wire .001”
G1, G2, G4, G5
Titanium Wire .002" G1, G2, G4, G5
Titanium Wire .003" G1, G2, G4, G5
Titanium Wire .004" G1, G2, G4, G5
Titanium Wire .005" G1, G2, G4, G5
Titanium Wire .006" G1, G2, G4, G5
Titanium Wire .007" G1, G2, G4, G5
Titanium Wire .008" G1, G2, G4, G5, 4N
Titanium Wire .009" G1, G2, G4, G5, 4N

Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

TITANIUM ROD

Material

Purity

Titanium Rod .0625” G1, G2, G4, G5, 4N
Titanium Rod .125” G1, G2, G4, G5, 4N
Titanium Rod .250” G1, G2, G4, G5, 4N
Titanium Rod .500” G1, G2, G4, G5, 4N
Titanium Rod .625” G1, G2, G4, G5, 4N
Titanium Rod .750” G1, G2, G4, G5, 4N
Titanium Rod 1” G1, G2, G4, G5, 4N

Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes..

TITANIUM FOIL

Material

Purity

Titanium Foil .001” G1, G2, G4
Titanium Foil .002”  camera1  camera1  camera1 G1, G2, G4
Titanium Foil .003” G1, G2, G4
Titanium Foil .004”  camera1  camera1  camera1 G1, G2, G4
Titanium Foil .005”  camera1
G1, G2, G4, 4N
Titanium Foil .006” G1, G2, G4, 4N
Titanium Foil .007” G1, G2, G4, 4N 4N
Titanium Foil .008” G1, G2, G4, 4N 4N
Titanium Foil .009” G1, G2, G4, 4N 4N

Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

TITANIUM SHEET

Material

Purity

Titanium Sheet .010”  camera1  camera1  camera1
G1, G2, G4, G5, 4N
Titanium Sheet .020"  camera1  camera1  camera1 G1, G2, G4, G5, 4N
Titanium Sheet .025"  camera1  camera1  camera1 G1, G2, G4, G5, 4N

Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

TITANIUM SPUTTERING TARGETS

Material

Purity

Titanium Sputtering Target 2"D X .125"T G1, G2, G4, G5, 4N
Titanium Sputtering Target 2"D X .250"T G1, G2, G4, G5, 4N
Titanium Sputtering Target 3"D X .125"T   G1, G2, G4, G5, 4N
Titanium Sputtering Target 3"D X .250"T G1, G2, G4, G5, 4N
Titanium Sputtering Target 4"D X .125"T G1, G2, G4, G5, 4N
Titanium Sputtering Target 4"D X .250"T G1, G2, G4, G5, 4N

Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.

TITANIUM POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Titanium Pellets  .125"D X .125"L G1, G2, G4, G5, 4N
Titanium Pellets .250"D X .250"L G1, G2, G4, G5, 4N
Titanium Pellets .125"D X .125"L Square   camera1 camera1 4N
Titanium Ingot G1, G2, G4, G5, 4N
Titanium Powder-100 Mesh G1, G2, G4, G5
Titanium Powder-325 Mesh G1, G2, G4, G5

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

TITANIUM COMPOUNDS

Material

Purity

Titanium Boride TiB2 -325 Mesh 2N5
Titanium Carbide TiC -325 Mesh 2N
Titanium Carbide TiC  2-4 Microns 2N5
Titanium Carbide TiC  5 Microns or Less 2N5
Titanium Nitride TiN  -325 Mesh 2N5
Titanium Nitride TiN   4-8 Micron 4N
Titanium Oxide TiO  -1/8" Pieces 3N
Titanium Oxide TiO  1/4" to 1/8" Pieces 3N
Titanium Oxide TiO  -325 Mesh 3N
Titanium Oxide TiO2  -150  +325 Mesh 2N5
Titanium Oxide TiO2  -325 Mesh 3N
Titanium Oxide TiO2  Tablets 3N
Titanium Oxide TiO2  1/4" to 1/8" Pieces 3N
Titanium Oxide TiO2  -325 Mesh  +10 Microns 2N5
Titanium Oxide TiO2  -100 Mesh 4N8
Titanium Oxide Ti2O -325 Mesh 2N8
Titanium Oxide Ti2O3  Tablets 3N
Titanium Selenide TiSe2  -325 Mesh 2N5
Titanium Silicide TiSi2  -325 Mesh 3N
Titanium Silicide Ti5Si3  -325 Mesh 3N

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

 

Material Safety Data Sheet - MSDS
Titanium MSDS
Technical Data Sheets
Titanium
Titanium Grade 1 Composition
Titanium Grade 2 Composition
Titanium Grade 3 Composition
Titanium Grade 4 Composition
Titanium Grade 5 Composition
Titanium Grade 7 Composition
Titanium - Machining
Understanding Mesh Sizes

 

Save