Contact Us
| ESPI Metals 1050 Benson Way Ashland, Oregon 97520 541.488.8311 telephone 800.638.2581 toll-free 541.488.8313 fax 800.488.0060 toll-free fax sales@espimetals.com |
Precious Metal Prices
![]() |
Serving Research Institutions Worldwide Since 1950 |
|
Tantalum-Tungsten 2.5% alloy is a high strength alloy for corrosion applications in heat transfer equipment, vessels, piping, etc., and all applications where tantalum’s physical properties are desired at a higher strength level than pure tantalum.
Typical Composition (ppm): Ti 100 max Ni 100 max Mo 200 max Si 25 max Fe 100 max Nb 0.5% max W 2.0 - 3.5 wt % Ta balance C 50 max O 150 max N 50 max H 15 max
Typical Properties: Density at 20 oC: 16.66 g/cc, (.602 lb/in3) Melting Point: 3014 oC (5457 oF) Coefficient of Expansion (20o - 500oC): 3.6 x 10-6/oF Thermal Conductivity (20o - 100 oC): 32 Btu/hr-ftoF Specific Heat (100 oC): .0336 Btu/lboF Electrical Resistivity (0o - 100 oC): 14.7 microhm ⋅ cm Typical Ultimate Tensile Strength (20 oC): 45,000 - 55,000 psi Typical Yield Strength (20 oC): 35,000 - 45,000 psi Young's Modulus of Elasticity: 27 x 106 psi Recrystallization Temperature: 1315 oC Stress Relieving Temperature: 1095 oC Hardness as Annealed (Typical): HV 115 - 160 HR 50 - 80 Thermal Neutron Absorption Cross Section: 21.3 b
Mechanical Properties (min): 0.2% % Tensile Strength Yield Strength Elongation Temp oC (psi) (psi) in 1" 20 50,000 35,000 20 100 48,000 30,000 15 200 42,000 27,400 10 250 40,000 25,500 10 |



